Leak detection services in Auckland

Leak detection services in Auckland

Leak detection services with mould testing and indoor air quality testing are provided by Rommel Building Enclosure Services, which specialises in identifying and issues related to moisture and mould in buildings.

The main goal of these services is to identify any leaks or moisture issues within a building, which can often lead to the growth of mould and other harmful microorganisms. The presence of mould can not only affect indoor air quality, but also cause structural damage and pose health risks to occupants. Leak detection services typically involve thoroughly inspecting the building, including areas such as roofs, walls, floors, and plumbing systems. The goal is to identify any areas where water may be entering the building or accumulating, such as from leaking pipes or damaged roofing.

There are variety of services in leak detections services such as electronic leak detection and also membrane water proofing test  .

What leak detection services does Rommel provide?

Electronic leak detection

Electronic leak detection is an important service for building management because it allows them to detect problems before they occur and make repairs. This process involves the use of several different tools and equipment that are specifically designed to detect leaks in the building. There are a number of different types of electronic leak detection systems that are used in the building industry today.

Most of these systems are designed to detect leaks in residential buildings, but some are also designed to detect leaks in commercial buildings as well. The advantages of using an electronic leak detection system are numerous.

Benefits of using leak detection services.

Electronic leak detection services offer a range of benefits, including accuracy, non-destructiveness, early detection, cost savings, and applicability to various membrane types. When implemented as part of a comprehensive maintenance and inspection strategy, electronic leak detection contributes to the overall durability and reliability of waterproofing systems in buildings.

A study on pre-applied waterproofing membranes conducted in 2021 provided the following recommendations. The study was carried out by , 

  • Seams after concreting: T-joints were found leaking even at low water pressures, as water-bearing capillaries remained during production.
  • Reopening of seams: It was reported that seams can open again after installation. The cause of this phenomenon has yet to be clarified and can be due to temperature expansions or improperly installed seams.

Detec Intregriscan, leak detection | Rommel What is IntegriScan

Electronic detection and membrane waterproof testing

If you have a basement or crawl space, it’s important to perform a membrane waterproofing test to ensure that your home is protected from the elements. In order to properly seal your basement, you must perform a waterproofing test before starting any work on your home, and you should follow up with this test as needed to ensure that waterproofing solutions remain effective. When you have waterproofing problems in your basement, it’s important to take action as soon as possible to protect your home. If you need help finding a good basement waterproofing company, you can always call us at +64274889042 Auckland , NZ

The Integriscan ELD is a low voltage (12V) electronic leak detection (ELD) system that can detect leaks at all levels of the building infrastructure – from water to steam systems, as well as HVAC systems. It is used in offices, factories, schools, hospitals and all other types of buildings. This system is a powerful tool for eliminating sources of moisture, thereby reducing the risk of mold and other environmental hazards that can cause serious health problems.

The system also provides valuable information that can be used to optimise HVAC systems and prevent costly repairs in the future. The system can detect leaks that are as small as 1/8 inch. The large detection area means that this system can detect leaks throughout the entire building. In addition, the system can be used to check for leaks in individual components or areas within a room. This can be done manually or automatically.

TruGround Prima is a system used for electrical leak detection testing in waterproofing applications. It consists of a conductive primer that is applied to the substrate before the waterproofing membrane is installed. The primer creates a conductive path between the substrate and the membrane, which allows for the detection of leaks in the membrane.

During the testing process, a low-voltage electrical current is applied to the conductive path created by the TruGround Prima primer. If there is a breach in the waterproofing membrane, the electrical current will flow through the breach and can be detected using a sensitive voltmeter. This allows the location of the leak to be identified so that repairs can be made before the waterproofing system is put into service.

TruGround Prima is commonly used in applications such as roofs, balconies, and parking decks where waterproofing is critical. It is designed to be fast-drying and compatible with a variety of substrates, including concrete, wood, and metal.

rommel official partner of detec australia leak detection How Meshless Membrane Testing Helps the Building Industry